Datsun 240z

For a number of years I had a 1973 Datsun 240z, and a 1978 280z 2+2 parts car. Here you will find some of the posts and videos from those two cars.

The motor is in the Project 240z!

Look out Jeffs, the motor is in the Project 240z! Dad and I spent all day today working on the car, and I even swung by one of Jeef's old employer's to pickup some parts today as well.

Dad spent most of the morning working on the clutch master cylinder and brake master cylinder, cleaning them up quite a bit, and using a rebuild kit on the clutch MC. The brake MC has some corrosion inside, so I'll be ordering a rebuilt MC tomorrow that I should be able to pickup tomorrow night.

I spent the morning taking parts off of the 78 motor, cleaning them and putting them onto the 83 motor. Over the afternoon and early evening Dad and I managed to seperate the 5spd transmission from the 78 motor and put it onto the 83 motor. From the looks of things the 83 motor was either once powering an automatic tranny, or was prepped to perform that work as we had to replace the driveplate with the flywheel/pressure plate from the 78 motor as well.

After getting the transmission together and putting some of the parts I scavanged from the 78 motor Dad and I managed to get the motor into the Project 240z. I must say, removing motors is far easier than actually putting them back in the car. We put bolts into the motor mounts, and also into the crossmember underneath the transmission to hold it all in place, but have yet to tighten anything down just yet.

The megasquirt equipment should be here soon, hopefully. I've still gotta find a few parts for the ignition/fuel system. My goal is still to fire up the car next weekend, though I'm going to need a lot of help to do that. I'm still hoping Mr. Whittle will be able to assist this week with getting the Megasquirt setup on the car.

Does anyone have a Ford Cobra MAF lying around anywhere? I'm in need of one.

Photos have been uploaded and can be found on the photos page!

Still half nakedIMG_0348Front shotIMG_0346IMG_0345IMG_0344

Recent Comments

There are currently no comments. Be the first to make a comment.

Add Comment

Please add your comment by filling out the field(s) below. Your comment may need to be approved before it becomes visible.
Enter your first name for display with the comment
Enter your last name for display with the comment.
Enter your email address so that we may contact you if necessary. We will also use this for your Gravatar.
Enter the URL to your website. URLs may be removed from comments.
Enter your comment here.
If you can't type Human2 in, you can't post, plain and simple.
Submit Comment Cancel

Chris Hammond is

Chris Hammond is a father, husband, leader, developer and car guy. Chris has long specialized in ASP.NET and DotNetNuke development, so you will find a variety of topics here on the website. For more information check out the about me page.

If you are looking for DotNetNuke consulting please visit my business website at https://www.christoc.com/